1
Plug and Attach
Plug in and switch on at the wall. Click the hose into the vacuum port to brush, trim or clean. Use the air port to dry.
Your Easy Guide
How to Use Your GROOMI 10-in-1
Brush, clip, dry and clean up. One machine does it all.
3 EASY STEPS
2
Pick Your Tool
There are 10 tools in the kit: brushes, a clipper, dryer nozzles and cleaning tools. Push one onto the hose. Twist until it clicks.
3
Pick Your Mode
Press the power button to turn it on. Press the mode button to change the power.
Three Power Modes
Eco
Low noise. For nervous pets and first sessions.
Standard
Mid power. For everyday grooming. Best for regular use.
Enhanced
Max suction. For heavy shedders and thick coats.
Brush
Three brush heads. Pick the one that suits your dog’s coat.
- Click the slicker onto the hose.
- Turn the machine on.
- Use short, gentle strokes.
- Click the de-shed onto the hose.
- Turn the machine on.
- Brush slowly, the way the fur grows.
- Click the rake onto the hose.
- Turn the machine on.
- Pull the rake through the coat, slowly.
Trim
- 1Pick a comb length. Click it onto the clipper.
- 2Attach the clipper to the hose.
- 3Turn on the machine to Eco, then the clipper.
- 4Trim slowly, the way the fur grows.
- 5Keep the comb flat on the coat.
Pick your comb
3mm
Paws and face tidy-ups.
6mm
A short, neat coat.
Best to start
9mm
A tidy trim for most dogs.
12mm
Longer coats. Leaves more length.
Dry
- Attach the hose to the air port.
- Click on a nozzle.
- Start on Eco. Keep the air moving.
Wide nozzle
Big areas, like the back.
Narrow nozzle
Legs and thick spots.
Comb nozzle
Dry and brush at once.
Clean up
Suck up the fur left on your floor and furniture.
Use it for: Couch gaps, corners and car seats.
- Click the crevice tool onto the hose.
- Turn the machine on.
- Run it slowly along the gap.
Use it for: Couches, dog beds and rugs.
- Click the pet hair remover onto the hose.
- Turn the machine on.
- Brush it across the fabric in one direction.
Frequently Asked Questions
Start on Eco. Turn it on in another room first. Give lots of treats.
Start with 9mm. You can always go shorter.
Brush and clip on a dry coat. Use the air port to dry after a bath.
Most dogs adjust within one or two sessions.
Start with the vacuum off until they are comfortable.
For dogs that stay noise-sensitive, add CalmEars and used by professional groomers.
Tap it clean after every groom.
Dust cup (after every use)
- Press the button on top. Lift the cup out.
- Open the clip. Tip the fur into the bin.
- Push the cup back in until it clicks.
Filters (every 2 months)
- Unplug the machine. Take out both filters.
- Rinse in cold water. Do not scrub.
- Let them dry for a full day. Then put them back.
Clipper blade (after each trim)
- Pop off the blade.
- Brush off the hair with the small brush.
- Click it back on.
- Product name: GROOMI 10-in-1 Pet Vacuum Grooming Kit
- Model: GRM-PVD10
- Vacuum power: 550W
- Dryer power: 850W
- Dryer temperature: regulated, 40–65°C
- Noise level: Less than 70dB on Eco
- Dust canister capacity: 1.3L
- Hose length: 1.45m
- Cord length: 2m
- Weight: 3.4kg
- Dimensions: 276 × 133 × 296 mm
- Materials: ABS / stainless steel / PP
- Use: dry vacuum, indoor use
- Power input: 220–240V~, 50/60Hz
- Safety: Class II · RCM certified · SAA approved (SAA-260561-EA)